ioLogik Cellular Micro RTU Controller Introduction
LED Indicators
Function Description Mark
Power Input OFF: No Power PWR
Green: Power On
Cellular Status OFF: Cellular Disconnected or in “On Demand” Mode GPRS or LINK
Amber: Cellular Connected at “Always ON”
Blinking: Connected with Active OPC Server
System Status Green: System Ready READY
Ready LED is blinking and Fault LED is not lit: Click&Go is
running
Ready LED is blinking and Fault LED is blinking: Safe Mode
Communication Activity
OFF: No communication DATA
Green: Serial Tx/Rx
System Fault Status RED: I/O out of work FAULT
OFF: Function Normal
Blinking: Safe Mode
Signal Status OFF: No signal, or No SIM Card SIGNAL
1 Green LED: Weak or insufficient (SMS only)
2 Green LEDs: Average (good for cellular connections)
3 Green LEDs: Excellent Signal
Physical Dimensions (unit = mm)
Package Checklist
The ioLogik W5300 is shipped with the following items:
Standard Accessories
• ioLogik W5300
• 3-pin screw terminal block x 1 (for power input)
• 12-pin screw terminal blocks x 2 (for I/O)
Comments to this Manuals