Moxa IOLOGIK E4200 User Manual download pdf (Page 44)

ioLogik Active Ethernet I/O Family User’s Manual Utilities

3-20

Click&Go Logic Tab (Administrator)

The Click&Go logic tab is where administrators set up the ioLogik E4200’s Active I/O messaging

logic. Instead of the I/O device reacting passively to repeated polling requests from a host for I/O

data, the ioLogik E4200 is able to actively send I/O information to the host when an I/O channel

satisfies conditions that you specify. Click&Go logic was developed by Moxa to provide a

powerful and easy-to-use tool for defining the conditions under which I/O information will be sent

over the network. Please refer to Chapter 5 for more detailed information.

Changes made in the Click&Go logic tab are not effective until you download the logic and the

ioLogik E4200 is restarted, as with changes made in other tabs.

ATTENTION

Note that when Click&Go logic is being used, the range and units of I/O channels being used in

Click&Go logic may not be modified.

Using TFTP to Import/Export Configuration

TFTP (Trivial File Transfer Protocol) was defined in 1980 to provide basic FTP functionality in a

very simple protocol. Due to TFTP’s simplicity, it can be implemented using a very small amount

of memory, an important consideration when it was first developed. The ioLogik E4200 I/O

supports the use of TFTP to import or export configuration files.

The following is an example using Windows TFTP and an ioLogik E4200 with an IP address of

192.168.127.254:

1. Enter “TFTP 192.168.127.254 GET ik4200.txt” to get the ioLogik’s configuration file.

2. Enter “TFTP 192.168.127.254 PUT ik4200.txt” to load a configuration file onto the ioLogik

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 104 105

No comments

Moxa IOLOGIK E4200 User Manual Page 44