Moxa IOLOGIK E4200 User Manual Page 71
- Page / 105
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ioLogik Active Ethernet I/O Family User’s Manual Click&Go Introduction
5-12
Timer
The Timer function can be used to control the timing of a logic rule in the IF conditions.
“TIMEOUT” is the only operator here. For example, uses can delay the triggering of an action or to
repeat an action periodically. Select the IF condition for Timer and click on the property button to
enter the Internal Register Settings window.
The “Used in:” column indicates this Timer is also used in the Rule-0, which helps the user to
identify the relationship between rules. Also the Set Timer button will help to define the default value
for the Timer.
Schedule
The Schedule function allows users to set a starting point or time period for a task. For example, a
pump needs to start at 9: 00 PM and stop at 11:00 PM every Monday, Wednesday, and Friday. Select
the IF condition to Schedule and click on the property button to enter the setting window. For
recurrent actions, select the Recurrence checkbox and select the week days. If there a time period
needs to be defined, specify the stop date in the range column.
Host Connection Fail
The Host Connection Fail function refers to when an ioLogik detects the timeout from a remote
Modbus/TCP host and directs it to one of the IF condition of the Click&Go logic. Timeout can be
used to trigger an action such as resetting the attached power line on a DO or relay channel to reboot
the device. Select the IF condition for Host Connection Fail and click on the property button to enter
the setting window. The condition of “Host Connection Fail” means that the two ioLogik E4200
connections were lost at same time after a specific period.
THEN/ELSE Actions
Under the THEN column, you can specify up to 3 actions that will be performed when the IF
conditions are satisfied. 3 actions under the ELSE column will also be performed when the IF is
NOT satisfied. Possible actions include changing the status of a DO channel, or sending a message
by SNMP trap, TCP, UDP, SMS, or e-mail.
- User’s Manual 1
- Table of Contents 3
- Introduction 5
- Traditional Remote I/O 6
- Active Ethernet Modular I/O 6
- Product Features 7
- Package Checklist 8
- Product Specifications 8
- Dimensions 10
- Hardware Reference 12
- Hardware Specifications 13
- Initial Setup 15
- System Architecture 16
- 20
- Connecting the Power System 22
- Connecting to the Network 23
- Utilities 25
- Features of Modular ioAdmin 26
- Getting Starting 27
- Functions on Menu Bar 31
- Navigation Panel 33
- Server Context Menu 33
- Quick Links 34
- Main Window (General) 34
- Administrator Functions 35
- Modbus Address 36
- I/O Status 36
- Power on Settings 37
- Safe Status Settings 37
- Test I/O 38
- Network Tab (Administrator) 40
- Watchdog Tab (Administrator) 41
- Active Tags (Administrator) 42
- Using ioEventLog 46
- Basic Functions 47
- Main Menu 47
- Connection 48
- Overview for ioLogik E4200 50
- Entering the Web Console 51
- Overview 51
- Basic Settings 52
- Network Settings 52
- Ethernet Configuration 53
- Route Table 53
- I/O Module 54
- System Management 55
- SNMP Agent 56
- Network Connection 56
- Firmware Update 57
- Import System Config 57
- Change password 58
- Load Factory Default 59
- Save/Restart 59
- Click&Go Introduction 60
- Features 62
- Click&Go Logic Basics 62
- Working with Rules 63
- Define Global Variables 64
- Internal Register Settings 65
- Timer Settings 66
- SNMP Trap Server 66
- E-Mail Server 67
- Active Message Settings 68
- SMS Phone Number Book 68
- IF/THEN/ELSE Statement 69
- THEN/ELSE Actions 71
- SNMP Trap 73
- Active Message 74
- CGI Command 75
- Short Message Service (SMS) 75
- Activating the Ruleset 76
- Ruleset Management Bar 76
- Ruleset Import/Export 77
- Pinouts and Cable Wiring 78
- Using Modbus/TCP 79
- Fixed mode (default mode): 89
- Dynamic mode: 90
- Module Configuration Map 90
- DO Module Configuration Map: 91
- DI Module Configuration Map: 91
- AO Module Configuration Map: 92
- AI Module Configuration Map: 92
- TC Module Configuration Map: 93
- Internal Registers 94
- Function 8 94
- CGI Commands 95
- Used Network Port Numbers 97
- SNMP MIB File 98
- Factory Default Settings 103
- Appendix G. FCC 105
© 2020, manymanuals.com. All rights reserved. | 0.992 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals