ioLogik Active Ethernet I/O Family User’s Manual Initial Setup
2-10
Configuring Your Network Architecture
The most important thing is configuring your network after you connected ioLogik E4200. One
example is as below architecture.
If you want to manage ioLogik E4200 from Host 1, you have to set one routing rule at ioLogik
E4200’s routing table as following:
Destination: 192.168.18.10
Network-Mask: 255.255.255.255
Gateway: 192.168.19.1
Interface: LAN-0
If you set “Destination”, “Network-Mask” as following will allow all hosts which are located in
subnet 192.168.18.x connect to this ioLogik E4200
Destination: 192.168.18.0
Network-Mask: 255.255.255.0
Gateway: 192.168.19.1
Interface: LAN-0
Comments to this Manuals