Moxa IOLOGIK E4200 User Manual Page 32
- Page / 105
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ioLogik Active Ethernet I/O Family User’s Manual Utilities
3-8
System
Several operations are possible from the System menu.
Auto Scan Active Ethernet Network Adaptor will search for ioLogik devices on the network.
When connecting for the first time or recovering from a network disconnection, you can use this
command to find I/O systems that are on the network.
Network Interface allows you to select a network to use if the PC has multiple network adaptors
installed.
If you can’t find the Network Adaptor, try specifying the network interface the host uses to connect
to the Network Adaptor.
I/O Status Refresh Interval is used to adjust how often the I/O system synchronizes with
Modular ioAdmin for I/O system status. The current rate is displayed on the “Sync. Rate
Information” at the bottom of the window. Note that higher sync rates result in higher loads on the
network. The default value is 50 (500 msec.). To change the configuration, click I/O Status
Refresh Interval under the System menu, and then adjust the data refresh rate. Note that the unit
is in 10 msec increments, so if you enter 100, the refresh rate becomes 1 sec.
TCP Socket Timeout Interval allows you to select the preferred timeout value for TCP socket
communication.
Active Message Listen Port specifies the port number to use for Active Ethernet I/O messages. If
your network uses a firewall, you can coordinate this setting with your firewall settings to ensure
that active messages get through. The default Listen Port is 9001.
Sort
The Sort menu allows the server list in the navigation panel to be sorted by connection, type, and
location.
They are sorted by Adaptor Location in default. You also can change the sorting method through
the sorting function or on Quick Link. You can sort by connection, location, or type.
Help
In the Help menu, you can view wiring guides and information about Modular ioAdmin.
- User’s Manual 1
- Table of Contents 3
- Introduction 5
- Traditional Remote I/O 6
- Active Ethernet Modular I/O 6
- Product Features 7
- Package Checklist 8
- Product Specifications 8
- Dimensions 10
- Hardware Reference 12
- Hardware Specifications 13
- Initial Setup 15
- System Architecture 16
- 20
- Connecting the Power System 22
- Connecting to the Network 23
- Utilities 25
- Features of Modular ioAdmin 26
- Getting Starting 27
- Functions on Menu Bar 31
- Navigation Panel 33
- Server Context Menu 33
- Quick Links 34
- Main Window (General) 34
- Administrator Functions 35
- Modbus Address 36
- I/O Status 36
- Power on Settings 37
- Safe Status Settings 37
- Test I/O 38
- Network Tab (Administrator) 40
- Watchdog Tab (Administrator) 41
- Active Tags (Administrator) 42
- Using ioEventLog 46
- Basic Functions 47
- Main Menu 47
- Connection 48
- Overview for ioLogik E4200 50
- Entering the Web Console 51
- Overview 51
- Basic Settings 52
- Network Settings 52
- Ethernet Configuration 53
- Route Table 53
- I/O Module 54
- System Management 55
- SNMP Agent 56
- Network Connection 56
- Firmware Update 57
- Import System Config 57
- Change password 58
- Load Factory Default 59
- Save/Restart 59
- Click&Go Introduction 60
- Features 62
- Click&Go Logic Basics 62
- Working with Rules 63
- Define Global Variables 64
- Internal Register Settings 65
- Timer Settings 66
- SNMP Trap Server 66
- E-Mail Server 67
- Active Message Settings 68
- SMS Phone Number Book 68
- IF/THEN/ELSE Statement 69
- THEN/ELSE Actions 71
- SNMP Trap 73
- Active Message 74
- CGI Command 75
- Short Message Service (SMS) 75
- Activating the Ruleset 76
- Ruleset Management Bar 76
- Ruleset Import/Export 77
- Pinouts and Cable Wiring 78
- Using Modbus/TCP 79
- Fixed mode (default mode): 89
- Dynamic mode: 90
- Module Configuration Map 90
- DO Module Configuration Map: 91
- DI Module Configuration Map: 91
- AO Module Configuration Map: 92
- AI Module Configuration Map: 92
- TC Module Configuration Map: 93
- Internal Registers 94
- Function 8 94
- CGI Commands 95
- Used Network Port Numbers 97
- SNMP MIB File 98
- Factory Default Settings 103
- Appendix G. FCC 105
© 2020, manymanuals.com. All rights reserved. | 2.435 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals