Moxa EDR-810 User Manual download pdf (Page 115)

Industrial Secure Router User's Manual Virtual Private Network (VPN)

9-3

All IPSec Connection

Users can Enable or Disable all VPN services with this configuration.

NOTE

The factory default s

etting is Disable, so when the user wants to use VPN function, make sure the setting is

enabled.

IPSec NAT-T

If there is an external NAT device between VPN tunnels, the user must enable the NAT-T (NAT-Traversal)

function.

IPSec Settings

IPSec Quick Setting

The Industrial Secure Router’s Quick Setting mode can be used to easily set up a site-to-site VPN tunnel for

two Industrial Secure Router units.

When choosing the Quick setting mode, the user just needs to configure the following:

• Tunnel Setting

• Security Setting

 Encryption Strength: Simple (AES-128), Standard (AES-192), Strong (AES-256)

 Password of Pre-Shared Key

NOTE

The Encryption strength and Pre

-Shared key should be configured identically for both Industrial Secure R

outer

units.

IPSec Advanced Setting

Click Advanced Setting to configure detailed VPN settings.

Tunnel Setting

Enable or Disable VPN Tunnel

Setting Description Factory Default

Enable or Disable Enable or Disable this VPN Tunnel Disable

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 128 129

No comments

Moxa EDR-810 User Manual Page 115