Moxa EDS-510A-3GT User Manual download pdf (Page 50)

EDS-510A Series User’s Manual Featured Functions

3-35

Configuring “Turbo Ring V2”

NOTE

When using the Dual-Ring architecture, users must configure settings for both Ring 1 and Ring 2.

In this case, the status of both rings will appear under “Current Status.”

Explanation of “Current Status” Items

Now Active

Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.

Ring 1/2—Status

Shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is

active.

Ring 1/2—Master/Slave

Indicates whether or not this EDS is the Master of the Turbo Ring. (This field appears only when

selected to operate in Turbo Ring or Turbo Ring V2 mode.)

NOTE

The user does not need to set the master to use Turbo Ring. If no master is set, the Turbo Ring

protocol will assign master status to one of the EDS units in the ring. The master is only used to

determine which segment serves as the backup path.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 126 127

No comments

Moxa EDS-510A-3GT User Manual Page 50