Moxa EDS-510A-3GT User Manual download pdf (Page 16)

Chapter 3 Featured Functions

In this chapter, we explain how to access the EDS-510A’s configuration options, perform

monitoring, and use administration functions. There are three ways to access these functions:

RS-232 console, Telnet console, and web browser. The serial console connection method, which

requires using a short serial cable to connect the EDS-510A to a PC’s COM port, can be used if

you do not know the EDS-510A’s IP address. The Telnet console and web browser connection

methods can be used to access the EDS-510A over an Ethernet LAN, or over the Internet.

The web console is the most user-friendly way to configure the EDS-510A. In this chapter, we use

the web console interface to introduce the functions. There are only a few differences between the

web console, serial console, and Telnet console.

The following topics are covered in this chapter:

 Configuring Basic Settings

 Using Port Trunking

 Configuring SNMP

 Using Communication Redundancy

 Using Traffic Prioritization

 Using Virtual LAN

 Using Multicast Filtering



 Using

Bandwidth Management

 Using Port Access Control

 Using Auto Warning



 Usin

g Line-Swap-Fast-Recovery

 Using Set Device IP

 Using Diagnosis

 Using Monitor

 Using the MAC Address Table

 Using Event Log

 Using Syslog

 Using HTTPS/SSL

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 126 127

No comments

Moxa EDS-510A-3GT User Manual Page 16