Moxa ONCELL G2110-T User Manual download pdf (Page 95)

OnCell G2100 Series User’s Manual GPRS Connection

7-10

Setting up the APN

Before using GPRS connection in Windows, the APN (Access Point Name) must be added as a

modem initialization command. The following instructions explain how to set up the APN.

ATTENTION

Check the signal strength indicators on the front panel of the OnCell G2100 Series modem. If the

LED indicators are dark, then the SIM card is not installed properly, or the modem is not picking

up a signal. If only one bar lights up, the signal is not strong enough for a GPRS connection.

Adjust the position of the antenna, change the location of the installation, or use an optional

high-gain antenna instead.

Make sure that your SIM card account supports GPRS service. In most regions, you will need to

apply with your mobile service provider to activate the service.

Make sure that the RS-232 port of the OnCell G2100 Series modem is connected. For the OnCell

G2150I, make sure DIP switch 1 is set to ON.

1. From the Control Panel, open Phone and Modem Options. On the Modem tab, click

Properties.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 104 105

No comments

Moxa ONCELL G2110-T User Manual Page 95