search

Moxa NPORT 5610-16 User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 14
NPort 5600 Series User’s Manual Getting Started
2-5
Connecting to a Serial Device
Connect the serial data cable between NPort 5600 and the serial device.
LED Indicators
The front panels of NPort 5600 have several LED indicators, as described in the following table.
LED Name LED Color LED Function
off Power is off, or power error condition exists.
Steady on: Power is on and NPort is booting up.
red
Blinking:
Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly.
Steady on:
Power is on and NPort is functioning
normally.
Ready
green
Blinking:
The NPort has been located by NPort
Administrator’s Location function.
orange Serial port is receiving data.
green Serial port is transmitting data.
1-16
off
No data is being transmitted or received through the serial
port.
Link Indicator on the Rear Panel of NPort 5650 Fiber Model
The rear panels of NPort 5600 have a link indicator, as described in the following table.
LED Name LED Color LED Function
off Fiber is disconnected
green Fiber is connected and no data is being transmitted
Link
blinking Fiber is connected and data is being transmitted
Real Time Clock
NPort 5600’s real time clock is powered by a lithium battery. We strongly recommend that you do
not replace the lithium battery without the presence of Moxa’s technical support engineers. If you
need a battery change, contact Moxa for assistance.
ATTENTION
There is risk of explosion if the battery is replaced by an incorrect type. You need to dispose
used batteries according to the instructions.
Adjustable Pull High/low Resistors for the RS-485 Port
In some critical environments, you may need to add termination resistors to prevent the reflection
of serial signals. When using termination resistors, it is important to set the pull high/low resistors
correctly so that the electrical signal is not corrupted. Since a particular pull high/low resistor
value cannot fit all environments, the NPort 5650 uses DIP switches to set the pull high/low
resistor values for each serial port.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 115 116

Comments to this Manuals

No comments
  • Microlab ProFire Vidre Linzer Morso US
  • Chicago Electric Rotary hammers StarTech.com Video cable adapters Breville Mixers DeWalt Work lights SkyLink Interface hubs
  • Black-decker AS600 Sandpiper S30 Metallic Sony SLT-A57K Acme CA10
  • LG WP320 User Manual Acer EB275U User Manual Toshiba 65H93 User Manual Acer Aspire ES1-531 User Manual Samsung S27D850T User Manual