Moxa CP-118EL-A User Manual download pdf (Page 68)

PCI Express Boards Software Installation

3-54

6. You will see the following screen. Press Enter to select the MOXA Multiport Serial Board you installed by port

and by model. For example, if you installed the CP-104EL, select 4 ports and then CP-104EL.

MOXA Smartio/Industio Family Installation Utility (Ver 1.11)

Smartio/Industio Family Basic Configuration

Board No.

Board Type

I/O Address

Interrupt

Bus/Dev No.

None

------------

None

------------

None

------------

None

------------

PgDn: getty Setting

Enter: Confirm Input Value

Esc: Exit

Tab: Change Item

7. The board’s basic information, such as I/O address, Bus No., and Device No., will be shown. The SCO

system will assign the resources automatically to the PCI Express board you selected.

8. Next, press “Esc” to exit and reboot your computer.

NOTE

Steps 9 & 10 are only for CP

-132EL Series and CP-114EL Series

9. After rebooting, key in “moxaadm”. When you see MAIN MENU, select Interface Configuration to set

your Resister and Interface. For example, if you want to set one of the CP-114EL ports as RS-422 and 120Ω,

you have to select RS-422 and 120Ω.

10. Save your Interface Configuration and then reboot computer again.

11. Note that whenever you change a MAIN MENU item, you have to reboot your computer.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 94 95

No comments

Moxa CP-118EL-A User Manual Page 68