Moxa UPORT 2210 User Manual download pdf (Page 30)

UPort 2000 Series User’s Manual Driver Installation

2-22

Loading the Moxa Driver

After installing the driver, you will be able to load the Moxa driver. The driver will be loaded

automatically when you plug the UPort 2000 into your PC, or you can load the driver manually by

issuing the following command:

# modprobe mxuport2000

If the driver has loaded successfully, you should see a message such as the following:

_MOXA UPort 2000 series driver ver 1.0 loaded successfully.

You can verify that the driver has loaded by entering the following command:

# lsmode

For additional information, please refer to readme.txt file in the mxuport2000 directory.

Unloading the Moxa Driver

The driver will not unload automatically when you unplug the UPort 2000 from the PC. To unload

the Moxa driver, you must remove it manually by issuing the following command:

#rmmod mxuport2000

You can verify that the driver was unloaded by entering the following command:

# lsmode

For additional information, please refer to readme.txt file in the mxuport2000 directory.

Removing the Moxa Driver and Utility Files

To remove the Moxa driver and utility files, navigate to the path /moxa/mxuport2000, and then

execute the following command:

#make clean;

Both the driver and utility files will be removed.

Using the mxustty Utility

To determine which UPort 2000 a particular serial device is connected to, use the “l” option with

the “mxustty” utility.

General usage:

mxustty <option> device

option = h to activate the help file

option = l (ell) to locate a particular UPort device

Use the following function call to locate the device ttyUSB3:

# mxustty -l /dev/ttyUSB3

1 2 ... 25 26 27 28 29 30 31

No comments

Moxa UPORT 2210 User Manual Page 30