Moxa ICF-1150-M-ST Installation Guide download pdf (Page 8)

- 8 -

ATTENTION

For Fiber Ring Users:

If the Rx LEDs of the converter glow continuously, remove

the fiber cable and connect again, then the system will not

have the same condition.

NOTE: “Ring Mode” can only be used for half-duplex

applications.

LED Indicators

There are 3 LEDs on the front panel of the ICF-1150.

LED Color Function

PWR Green Steady ON: Power is ON

Fiber Tx Green When sending serial data from the fiber port

Fiber Rx Yellow When receiving data from the fiber port

Specifications

Serial Communication

Signals for RS-232 TxD, RxD, SGND

Signals for RS-422 TxD+, TxD-, RxD+, RxD-, SGND

Signals for 4-wire RS-485 TxD+, TxD-, RxD+, RxD-, SGND

Signals for 2-wire RS-485 Data+, Data-, SGND

Baudrate 50 bps to 921.6 Kbps

ESD protection 15 KV ESD

Fiber Communication

Connector type ST or SC

Distance Single-mode fiber for 40 km

Multi-mode fiber for 5 km

Support Cable : 8.3/125, 8.7/125, 9/125 or 10/125 μm

(single mode)

50/125, 62.5/125, or 100/140 μm

(multimode)

Wavelength ICF-1150-S: 1310 nm

ICF-1150-M: 850 nm

TX Output ICF-1150-S: > -5 dBm

ICF-1150-M: > -5 dBm

RX Sensitivity ICF-1150-S: -25 dBm

ICF-1150-M: -20 dBm

Point-to-Point Transmission Half or Full duplex

Multi-drop Transmission Half duplex, fiber ring

Environmental

Operating Temperature

0 to 60°C (32 to 142°F), 5 to 95 % RH

-40 to 85°C (-40 to 167°F) for –T Model

Storage Temperature -40 to 85°C (-4 to 185°F), 5 to 95 % RH

Power

Input Power Voltage 12 to 48 VDC

Power Line Protection 4 KV Burst (EFT), EN61000-4-4

2 KV Surge, EN61000-4-5

Reverse Power Protection Protects against V+/V- reversal

Over Current Protection Protects against 2 signals shorted together:

1.1A

Power Consumption ICF-1150-S/M-SC/ST: 127 mA @ 12V

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Moxa ICF-1150-M-ST Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Serial converters/repeaters/isolators Moxa ICF-1150-M-ST