Moxa NPORT 5450-T Datasheet download pdf (Page 1)

www.moxa.com

[email protected]

Serial-to-Ethernet Device Servers

Dual DC Power Inputs

Adjustable Termination and Pull High/Low Resistors

User-friendly LCD Panel for Easy Installation

Independent Operation Mode for Each Serial Port

Network Readiness for up to Four Serial Devices

NPort

5400 Series

4-port RS-232/422/485 serial device servers

10/100M auto-sensing Ethernet ›

4 serial ports, with support for RS-232, RS-422, and RS-485 ›

Built-in 15 KV ESD surge protection for all serial signals ›

Versatile socket operation modes, including TCP Server, TCP ›

Client, and UDP

Choice of conﬁguration methods: Web console, Telnet console, ›

and Windows utility

SNMP MIB-II for network management ›

2 KV isolation protection for NPort® 5430I/5450I/5450I-T ›

-40 to 75°C operating temperature (T model) ›

NPort® 5400 device servers can conveniently and transparently

connect up to four serial devices to an Ethernet network, allowing you

to network your existing serial devices with only basic configuration.

Data transmission between the serial and Ethernet interfaces is

NPort® 5400 device servers can be used to connect different devices

for remote data polling or event handling over a TCP/IP network. Each

serial port on the NPort® 5400 operates independently to provide

NPort® 5400 device servers support dual power sources by providing

both a DC terminal block input and a DC power jack input. Providing

two types of power input gives users greater flexibility for use with

different applications.

An LCD panel is built into the NPort® 5400’s top panel, with four

buttons for inputting data, configuration, and selecting the operation

mode. The LCD panel displays the server name, serial number, and

IP address, and can be used to enter or modify parameters such as

IP address, netmask, and gateway. (The LCD panel is not available on

wide temperature models.)

bi-directional. By using NPort® device servers, you not only protect

your current hardware investment, but also allow for future network

expansion. You can both centralize the management of your serial

devices, and distribute management hosts over the network.

maximum versatility. For example, port 1 can operate in Driver mode,

port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.

The NPort 5400 series provides adjustable termination and pull high/

low resistors for RS-485 applications. In some critical environments,

termination resistors may be needed to prevent the reflection of serial

signals, and the pull high/low resistors may need adjusting to maintain

the integrity of the electrical signal. Since no set of resistor values is

universally compatible with all environments, the NPort® 5400 has

four sets of DIP switches on the bottom panel to set the termination

and pull high/low resistor values.

1 2 3

Summary of Contents

Page 1 - 5400 Series

[email protected] Device ServersDual DC Power InputsAdjustable Termination and Pull High/Low ResistorsUser-friendly LCD Pan

Page 2 - Speciﬁcations

[email protected] Device ServersAppearanceSpeciﬁcationsEthernet InterfaceNumber of Ports: 1Speed: 10/100 Mbps, auto MDI/MDI

Page 3 - - / Data

Comments to this Manuals

No comments

Moxa NPORT 5450-T Datasheet Page 1

Browse online or download Datasheet for Serial servers Moxa NPORT 5450-T. Moxa NPort 5450 User Manual

Summary of Contents

Comments to this Manuals

Moxa NPORT 5450-T Datasheet Page 1

Browse online or download Datasheet for Serial servers Moxa NPORT 5450-T. Moxa NPort 5450 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Serial servers Moxa NPORT 5450-T