- 5 -
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back panel of
the IMC-101G when you take it out of the box. If you need to reattach the
DIN-Rail attachment plate to the IMC-101G, make sure the stiff metal spring is
situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the Moxa Industrial Media Converter from the DIN-Rail, simply
reverse Steps 1 and 2 above.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount the Moxa industrial
media converter on the wall, as illustrated below.
STEP 1:
Remove the aluminum DIN-Rail attachment plate from the IMC-101G, and
then attach the wall mount plates, as shown in the diagrams below.
Top
plate
Bottom
plate
Comments to this Manuals