Moxa Managed SHDSL Ethernet extenders Installation Guide Page 1

 2012 Moxa Inc. All rights reserved. P/N: 1802004020010 IEX-402-SHDSL Series Hardware Installation Guide Moxa Managed SHDSL Ethernet E

- 10 - Restore Factory Defaults Button Press and hold the Reset button for 5 seconds to load the factory default settings. Use a pointed object, such

- 11 - rate follows defined standard mode value defined Turbo mode value LED Indicators LED Color State Description PWR1 AMBER On Power is being sup

- 12 - DSL Speed/SNR LED Indicator Five Levels of SNR/SPEED Setting Turbo Speed (K bits) 5 10297 – 15304 4 5697 – 10296 3 3457 – 5696 2 1025 – 3456

- 13 - Reverse Polarity Protection Present Physical Characteristics Housing Metal, IP30 protected Dimension 35 x 130 x 105 mm Weight 0.29 kg Instal

- 2 - Overview The Moxa IEX-402-SHDSL Series Ethernet Extender consists of one 10/100BaseT(x) port and a DSL interface that provides an economical so

- 3 - IEX-402-SHDSL Panel Layout Front Panel View Top Panel View Rear Panel View 1. Terminal block for power input (PWR1, PWR2) 2. Power input

- 4 - Mounting Dimensions (unit = mm[inches])

- 5 - DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the IEX-402-SHDSL when you take it out of

- 6 - NOTE Before tightening the screws into the wall, make sure the screw head and shank size are suitable by inserting the screw into one of the ke

- 7 - Wiring the Redundant Power Inputs Both power inputs can be connected simultaneously to live DC power sources. If one power source fails, the ot

- 8 - RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring DSL Port Connection The DSL p

- 9 - RS-232 Console Port Connection The IEX-402-SHDSL has one RS-232 (10-pin RJ45) console port, located on the top panel. Use either an RJ45-to-DB9