OnCell G3100 Series
Industrial quad-band GSM/GPRS/EDGE IP modem
Universal quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz ›
Choice of operation modes, including TCP Server, TCP Client, ›
UDP, Real COM driver, and RFC2217
Secure modes for TCP Server, TCP Client, and Real COM ›
Versatile GSM/GPRS/EDGE connection modes ›
Redundant DC power input ›
LED indicators for status and signal level ›
2 digital inputs and 1 relay output ›
Choice of confi guration methods, including web console , serial ›
console, and Telnet
DIN-Rail ›
The OnCell G3100 industrial RS-232 or RS-232/422/485 GSM/
GPRS/EDGE IP modems are designed to transmit data and short
messages (SMS) over GSM/GPRS/EDGE cellular networks. The Real
COM operation mode automatically generates a virtual COM port to
match serial ports supported by the OnCell G3100, allowing you to
communicate with remote serial devices. The OnCell G3100’s CPU
comes pre-installed with the TCP/IP protocol suite to transmit data
back and forth between the serial device and cellular TCP/IP network.
It also comes with a built-in relay output that can be configured to
indicate the priority of events when notifying or warning engineers
in the field, and the two digital inputs allow you to connect basic I/O
devices, such as sensors, to the cellular network. The G3100 can
be mounted on a DIN-rail, and the 12 to 48 VDC power input has 2
KV EFT/Surge protection to allow the use of different types of field
power source. The serial ports are also protected by 15 KV ESD
line protection to keep your system safe from unexpected electrical
discharges.
Overview
Specifi cations
The certifi cation logos shown here apply to some or all of the products in this
section. Please see the Specifi cations section or Moxa’s website for details.
Hardware
CPU: MOXA ART CPU, 192 MHz
RAM: 8 MB
Flash ROM: 4 MB
LAN Interface
Ethernet: 10/100 Mbps, RJ45 connector, Auto MDI/MDIX
Magnetic Isolation Protection: 1.5 KV built-in
Cellular Interface
Standards: GSM/GPRS/EDGE
Band Options: Quad-band 850/900 and 1800/1900 MHz
GPRS Multi-slot Class: Class 12
GPRS Terminal Device Class: Class B
GPRS Coding Schemes: CS1 to CS4
Tx Power: 1 watt GSM 1800/1900, 2 watts EGSM 850/900
SIM Control: 3 V
Serial Interface
Serial Standards:
G3110: RS-232 (DB9 male connector)
G3150: RS-232 (DB9 male connector), RS-422/485 (5-pin terminal
block connector)
Number of Ports: 1
ESD Protection: 15 KV
Power EFT/Surge Protection: 2 KV
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2 (when parity = None)
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
I/O Interface
Alarm Contact: 1 relay output with current carrying capacity of 1A @
24 VDC
Digital Input: 2 inputs electrically isolated from the electronics
Software
Network Protocols: ICMP, TCP/IP, UDP, DHCP, Telnet, DNS, SNMP,
HTTP, HTTPS, SMTP, SNTP, ARP
Operation Modes: RealCOM, Secure RealCOM, TCP Server, Secure
TCP Server, TCP Client, Secure TCP Client, UDP, RFC2217, Ethernet
Modem, SMS Tunnel
Confi guration and Management Options: SNMP MIB-II, v3, DDNS,
IP Report, Web/Telnet/Serial Console, Serial Logging
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals